initdb — create a new PostgreSQL database cluster
initdb
[option
...] [ --pgdata
| -D
] directory
initdb
creates a new
PostgreSQL database cluster. A database
cluster is a collection of databases that are managed by a single
server instance.
Creating a database cluster consists of creating the directories in
which the database data will live, generating the shared catalog
tables (tables that belong to the whole cluster rather than to any
particular database), and creating the postgres
,
template1
, and template0
databases.
The postgres
database is a default database meant
for use by users, utilities and third party applications.
template1
and template0
are
meant as source databases to be copied by later CREATE
DATABASE
commands. template0
should never
be modified, but you can add objects to template1
,
which by default will be copied into databases created later. See
Section 23.3 for more details.
Although initdb
will attempt to create the
specified data directory, it might not have permission if the parent
directory of the desired data directory is root-owned. To initialize
in such a setup, create an empty data directory as root, then use
chown
to assign ownership of that directory to the
database user account, then su
to become the
database user to run initdb
.
initdb
must be run as the user that will own the
server process, because the server needs to have access to the
files and directories that initdb
creates.
Since the server cannot be run as root, you must not run
initdb
as root either. (It will in fact refuse
to do so.)
For security reasons the new cluster created by initdb
will only be accessible by the cluster owner by default. The
--allow-group-access
option allows any user in the same
group as the cluster owner to read files in the cluster. This is useful
for performing backups as a non-privileged user.
initdb
initializes the database cluster's default locale
and character set encoding. These can also be set separately for each
database when it is created. initdb
determines those
settings for the template databases, which will serve as the default for
all other databases. By default, initdb
uses the
locale provider libc
, takes the locale settings from
the environment, and determines the encoding from the locale settings.
This is almost always sufficient, unless there are special requirements.
To choose a different locale for the cluster, use the option
--locale
. There are also individual options
--lc-*
(see below) to set values for the individual locale
categories. Note that inconsistent settings for different locale
categories can give nonsensical results, so this should be used with care.
Alternatively, the ICU library can be used to provide locale services.
(Again, this only sets the default for subsequently created databases.) To
select this option, specify --locale-provider=icu
.
To choose the specific ICU locale ID to apply, use the option
--icu-locale
. Note that
for implementation reasons and to support legacy code,
initdb
will still select and initialize libc locale
settings when the ICU locale provider is used.
When initdb
runs, it will print out the locale settings
it has chosen. If you have complex requirements or specified multiple
options, it is advisable to check that the result matches what was
intended.
More details about locale settings can be found in Section 24.1.
To alter the default encoding, use the --encoding
.
More details can be found in Section 24.3.
-A authmethod
--auth=authmethod
This option specifies the default authentication method for local
users used in pg_hba.conf
(host
and local
lines). See Section 21.1
for an overview of valid values.
initdb
will
prepopulate pg_hba.conf
entries using the
specified authentication method for non-replication as well as
replication connections.
Do not use trust
unless you trust all local users on your
system. trust
is the default for ease of installation.
--auth-host=authmethod
This option specifies the authentication method for local users via
TCP/IP connections used in pg_hba.conf
(host
lines).
--auth-local=authmethod
This option specifies the authentication method for local users via
Unix-domain socket connections used in pg_hba.conf
(local
lines).
-D directory
--pgdata=directory
This option specifies the directory where the database cluster
should be stored. This is the only information required by
initdb
, but you can avoid writing it by
setting the PGDATA
environment variable, which
can be convenient since the database server
(postgres
) can find the database
directory later by the same variable.
-E encoding
--encoding=encoding
Selects the encoding of the template databases. This will also
be the default encoding of any database you create later,
unless you override it then. The default is derived from the locale,
if the libc locale provider is used, or UTF8
if the
ICU locale provider is used. The character sets supported by
the PostgreSQL server are described
in Section 24.3.1.
-g
--allow-group-access
Allows users in the same group as the cluster owner to read all cluster
files created by initdb
. This option is ignored
on Windows as it does not support
POSIX-style group permissions.
--icu-locale=locale
Specifies the ICU locale ID, if the ICU locale provider is used.
-k
--data-checksums
Use checksums on data pages to help detect corruption by the
I/O system that would otherwise be silent. Enabling checksums
may incur a noticeable performance penalty. If set, checksums
are calculated for all objects, in all databases. All checksum
failures will be reported in the
pg_stat_database
view.
See Section 30.2 for details.
--locale=locale
Sets the default locale for the database cluster. If this
option is not specified, the locale is inherited from the
environment that initdb
runs in. Locale
support is described in Section 24.1.
--lc-collate=locale
--lc-ctype=locale
--lc-messages=locale
--lc-monetary=locale
--lc-numeric=locale
--lc-time=locale
Like --locale
, but only sets the locale in
the specified category.
--no-locale
Equivalent to --locale=C
.
--locale-provider={libc
|icu
}
This option sets the locale provider for databases created in the
new cluster. It can be overridden in the CREATE
DATABASE
command when new databases are subsequently
created. The default is libc
.
-N
--no-sync
By default, initdb
will wait for all files to be
written safely to disk. This option causes initdb
to return without waiting, which is faster, but means that a
subsequent operating system crash can leave the data directory
corrupt. Generally, this option is useful for testing, but should not
be used when creating a production installation.
--no-instructions
By default, initdb
will write instructions for how
to start the cluster at the end of its output. This option causes
those instructions to be left out. This is primarily intended for use
by tools that wrap initdb
in platform-specific
behavior, where those instructions are likely to be incorrect.
--pwfile=filename
Makes initdb
read the database superuser's password
from a file. The first line of the file is taken as the password.
-S
--sync-only
Safely write all database files to disk and exit. This does not
perform any of the normal initdb operations.
Generally, this option is useful for ensuring reliable recovery after
changing fsync from off
to
on
.
-T config
--text-search-config=config
Sets the default text search configuration. See default_text_search_config for further information.
-U username
--username=username
Selects the user name of the database superuser. This defaults
to the name of the effective user running
initdb
. It is really not important what the
superuser's name is, but one might choose to keep the
customary name postgres, even if the operating
system user's name is different.
-W
--pwprompt
Makes initdb
prompt for a password
to give the database superuser. If you don't plan on using password
authentication, this is not important. Otherwise you won't be
able to use password authentication until you have a password
set up.
-X directory
--waldir=directory
This option specifies the directory where the write-ahead log should be stored.
--wal-segsize=size
Set the WAL segment size, in megabytes. This is the size of each individual file in the WAL log. The default size is 16 megabytes. The value must be a power of 2 between 1 and 1024 (megabytes). This option can only be set during initialization, and cannot be changed later.
It may be useful to adjust this size to control the granularity of WAL log shipping or archiving. Also, in databases with a high volume of WAL, the sheer number of WAL files per directory can become a performance and management problem. Increasing the WAL file size will reduce the number of WAL files.
Other, less commonly used, options are also available:
-d
--debug
Print debugging output from the bootstrap backend and a few other
messages of lesser interest for the general public.
The bootstrap backend is the program initdb
uses to create the catalog tables. This option generates a tremendous
amount of extremely boring output.
--discard-caches
Run the bootstrap backend with the
debug_discard_caches=1
option.
This takes a very long time and is only of use for deep debugging.
-L directory
Specifies where initdb
should find
its input files to initialize the database cluster. This is
normally not necessary. You will be told if you need to
specify their location explicitly.
-n
--no-clean
By default, when initdb
determines that an error prevented it from completely creating the database
cluster, it removes any files it might have created before discovering
that it cannot finish the job. This option inhibits tidying-up and is
thus useful for debugging.
Other options:
-V
--version
Print the initdb version and exit.
-?
--help
Show help about initdb command line arguments, and exit.
PGDATA
Specifies the directory where the database cluster is to be
stored; can be overridden using the -D
option.
PG_COLOR
Specifies whether to use color in diagnostic messages. Possible values
are always
, auto
and
never
.
TZ
Specifies the default time zone of the created database cluster. The value should be a full time zone name (see Section 8.5.3).
This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see Section 34.15).
initdb
can also be invoked via
pg_ctl initdb
.